Before we start
- Move cars away from the house, especially on the downwind side
- Bring in patio furniture, grills and pet items near the walls
- Keep pets inside or away from the work area
- Tell us about outdoor spigots we can use for washing
- Turn off the swamp cooler if we're working near it
Day one: wash and inspect
The roof gets pressure washed to remove dirt, sand and loose coating. Wet foam is marked for repair. Then the roof needs time to dry — in Rio Rancho's dry air, often the same day, but it depends on the weather.
Day two: repairs and details
Damaged foam is cut out and replaced. Cracks are sealed. Vents, skylights, coolers and parapet corners get their own coat, often with reinforcing fabric.
Day two or three: the topcoat
The coating goes on with a sprayer or rollers, usually in two coats with drying time between. On windy days we roll near edges or wait for calmer weather.
Cleanup
Masking comes off, debris is hauled away, and we walk the job with you if you'd like. You'll get the product information for your records.
Smell and noise
Pressure washers and sprayers are loud, but only for short periods. Water-based acrylics have a mild smell. Some coatings and foam have stronger odors while they're applied; we'll tell you what to expect for your job.
Questions about the schedule? Call (505) 448-1467.
Common questions
Do I need to be home?
No, as long as we can reach the roof and the area around the house is ready.
What if it rains?
We watch the forecast closely and reschedule if rain is likely before the coating cures.